pk10高反水大群

中走丝电柜

categories of news

Equipment classification

contact us

Suzhou Pulichen CNC Equipment Co., Ltd.

Contact: Wang Wei

Service Hotline: 13915525169

Phone: 0512-63911176

Email: 56993239@QQ.COM

Postcode: 215216

Company Address: No. 388 Fuhua Road, Tongli Town, Wujiang District, Suzhou City

Website: fxhhsgs.com



common problem

Your current location : Home >> News >> FAQ
  • Trouble shooting when the middle wire cutting carriage moves

    There are many reasons for the beating of the mid-wire wire cutting carriage when moving: The stepping motor of the mid-wire wire cutting machine tool is mostly five-phase ten-beat or three-phase six-beat system, that is, the phase is sequentially attracted according to a specific phase sequence to achieve the step purpose. Phase loss or phase sequence error will make the motor lose step
    Release time: 2016-05-11 Clicks: 227
  • How to determine the machining allowance of a wire-cut workpiece

    How to determine the machining allowance of a part when designing an EDM machining process? There are three methods for determining the EDM machining allowance. (1) EDM wire table lookup table correction method According to production practice and experimental research,
    Release time: 2016-05-11 Clicks: 154
  • Understand the performance indicators of wire-cut molybdenum wire for selection

    Modern wire cutting power supplies have strict requirements on electrode wires. It must be able to withstand large cutting currents with peaks in excess of 700 amps or averages in excess of 45 amps, and the transmission of energy must be very effective in order to provide the high-frequency pulse current required to achieve a high surface finish (above 0.2Ra). This depends on the resistance or conductivity of the electrode wire. Copper is the most conductive
    Release time: 2016-05-11 Clicks: 140
  • Precautions for using EDM in winter

    The precautions for the use of EDM machine tools in winter are due to the low temperature of EDM machine tools in winter. There should be a few points worth using during the use of the EDM machine tools compared to normal temperature. Set the "voltage adjustment" knob 2 "Pulse amplitude" switch on 1 + 2 + 2, "Pulse width
    Release time: 2016-05-11 Clicks: 120
  • Introduction to Wire Cutting Machine

    In the middle of the 20th century, when the Lazarinkos of the Soviet Union studied the phenomenon and causes of corrosion damage of switch contacts by spark discharge, they discovered that the instantaneous high temperature of electric sparks could cause local metals to melt, oxidize and be corroded, thereby creating and inventing electricity Spark machining methods, wire-cut electric discharge machines were also invented in the Soviet Union in 1960. At the time, I looked at the outline with a projector
    Release time: 2016-05-11 Clicks: 110
  • Application of Wire-cut Wire Cutting Machine Tool

    1. Widely used in processing various dies. 2. 2. It can process fine shaped holes, narrow slits and complex shapes. Machining templates and forming tools. 4. 4. Processing powder metallurgy mold, inserting cavity mold, wire drawing mold, corrugated plate forming mold. Processing hard materials, cutting flakes, cutting precious metal materials. 6. Machining cams, special gears
    Release time: 2016-05-11 Clicks: 117
  • How to determine the workpiece allowance for wire cutting machining

    How to determine the machining allowance of a part when designing an EDM machining process? There are three methods for determining the EDM machining allowance. (1) EDM wire table lookup table correction method According to production practice and experimental research,
    Release time: 2016-05-11 Clicks: 187
online service
share it
Welcome to leave us a message
Please enter your message here and we will contact you as soon as possible.
Name
Contact person
phone
Landline / mobile number
加拿大28信誉平台 pk10赔率9.99红包群 代理pc蛋蛋公众号 澳洲幸运10赔率9.99综合群 北京赛车群 代理北京赛车微信群 pk10福利多的扫码群 幸运飞艇代理 极速赛车游戏群 pk10赛车实力平台